Description

Ideal for ensuring electroplating thickness by presetting AMP-HOUR
Useful for checking Amp-Hour of rechargeable batteries using voltage limit
Separate displays for Voltage, Current and Amp-Hour
Programmable for AH/0.1AH/Amin/0.1AMin
Usable with any shunt by setting ‘Calibration’ for Amp-75mV
Calibration factor lockable from rear
4 Digit Amp-Hour and 6 Digit cumulative Amp-Hour display
Attractive front panel membrane switches in rugged Aluminum cabinet
In case of power failure, the current status of selected parameters, the current Amp-Hour and Cumulative Amp-Hour is saved

Additional information

Your custom text or HTML.

Display	All of 0.56in character height Red 7 Segment displays a.3 Digits to display voltage 0 – 99.9V b.4 Digits to display current 0 – 999.9Amps c.6 Digits to display Amp-Hour (4 Digit) and cumulative Amp-Hour (6 Digit)
Max. Shunt	Max. value of 999.9 Amps corresponding to 75mV. User programmable from front in ‘CAL’ mode. (Max. value of 9999Amps also available on request)
Selection of Amp	Short Pin 17-18 for Amp-Hour
Hour/Min	Open link of Pin 17-18 for Amp-Minute
0.1AH/Amin	Higher 0.1 resolution by shifting internal jumper by opening cover
Totaliser	6 Digit readable in ‘Total’ Mode
Limit	Up to 9999 Ahr/Amin settable in limit mode using increment/decrement switches
Relay	NO-P-NC of 5 Amp at 220V AC contact rating
Start	Pressing front panel switch or momentarily shorting rear Pins 5 & 6 by wiring an external switch
Memory	Non-volatile EEPROM solid state memory Stores programmed value of shunt, preset value, current Amp-Hr and the current Cumulative Amp-Hr to preserve current status on power failure
Lock	Open Link between Pin 1 & 2 to Lock ‘Cal’ i.e. shunt value
Low Volt.	Internally set at 10.5V for testing 12V battery. Short Pins 3
Stop	4 for this function
Supply	220V AC ± 10% at 50/60Hz
Size	Vertical type with front panel 96 x 192 mm
Terminals	At rear with marking for wiring
Mounting	Panel Mounted
Fuse	At rear of 0.2Amps

Additional Information

Display:

All of 0.56in character height Red 7 Segment displays a.3 Digits to display voltage 0 – 99.9V b.4 Digits to display current 0 – 999.9Amps c.6 Digits to display Amp-Hour (4 Digit) and cumulative Amp-Hour (6 Digit)

Max. Shunt:

Max. value of 999.9 Amps corresponding to 75mV. User programmable from front in ‘CAL’ mode. (Max. value of 9999Amps also available on request)

Selection of Amp:

Short Pin 17-18 for Amp-Hour

Hour/Min:

Open link of Pin 17-18 for Amp-Minute

0.1AH/Amin:

Higher 0.1 resolution by shifting internal jumper by opening cover

Totaliser:

6 Digit readable in ‘Total’ Mode

Limit:

Up to 9999 Ahr/Amin settable in limit mode using increment/decrement switches

Relay:

NO-P-NC of 5 Amp at 220V AC contact rating

Start:

Pressing front panel switch or momentarily shorting rear Pins 5 & 6 by wiring an external switch

Memory:

Non-volatile EEPROM solid state memory Stores programmed value of shunt, preset value, current Amp-Hr and the current Cumulative Amp-Hr to preserve current status on power failure

Lock:

Open Link between Pin 1 & 2 to Lock ‘Cal’ i.e. shunt value

Low Volt.:

Internally set at 10.5V for testing 12V battery. Short Pins 3

Stop:

4 for this function

Supply:

220V AC ± 10% at 50/60Hz

Size:

Vertical type with front panel 96 x 192 mm

Terminals:

At rear with marking for wiring

Mounting:

Panel Mounted

Fuse:

At rear of 0.2Amps

Programmable Amp Hr Meter

Programmable Amp Hr Meter